Audison

Image
SKU
Product
Rating
Price
  • DRC MP

    DIGITAL REMOTE CONTROL – MULTIMEDIA PLAY

    The new Audison DRC MP (Digital Remote Control Multimedia Play) is compatible with all the Audison electronics featuring AC Link bus. Its slim profile along with the holder supplied with it eases the installation in the best position inside the car. Thanks to the new Joystick, “Rubber Touch” finished for best control of the movements along the four direction axes, the “DRC Settings” menu can be adjusted and navigation is also possible through the “Navi Command” function if the system features an Audison bit Play HD with video output connected to a monitor.

  • ES3
    SKU: ES3

    BIT ENERGY STORAGE START & STOP

    It prevents the processor from shutting down when turning on vehicles featuring the start & stop system

    When starting the engine, the vehicle battery voltage might decrease below 8 Volts value. If an Audison bit processor is installed in your system, especially with vehicles featuring the start & stop system, low supply voltage values might make the processor shut down. In order to avoid waiting for the processor to complete its turn-on cycle again, you can install the ES3 by connecting it in series to the processor power supply cables.

  • SPM 4

    4 CH STEREO PASSIVE MIXER

    Stereo passive mixer (unpowered) featuring 4 input channels and 2 output channels, designed for active OEM multi-way systems where each speaker is powered by one specific amplified channel. SPM4 mixes audio through 4 audio transformers specifically developed to achieve very low distortion and highly linear acoustic response. SPM4 provides the ability to mix the midrange/woofer and tweeter channels coming from the amplifier and supply one single mid-high channel. The Ch1(L/R) channels feature two inputs, one features an inverting input compared to Ch2 (L/R) channels; the mixing process often gives better results when one of the two channels undergoes a 180° dephasing. SPM4 is especially recommended to extend the number of inputs of the Audison digital processors or amplifiers with built-in DSP because they feature a De-equalizer (De-Eq). In that case, any possible non-linear acoustic emissions due to the mixing of the pre-existing filtered channels are duly compensated.

  • TH 1.5 II Violino

    THG 1.5 II
    THG 1.5 II optional mesh grilles dedicated to TH 1.5 Violino can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

    Comp Tweeter
    Size 38 mm (1.5″)
    Power Handling 200 (Hi-Pass filtered @ 1,8kHz – 12 dB Oct.) W peak
    Impedance 6 Ohm
    Frequency Response 800 ÷ 26k Hz
    Sensitivity 93 dB/Spl
    Magnet N38 “H-grade” Neodymium
    Dome Tetolon fibre

  • TH 3.0 II Voce

    Technical Data
    Comp Midrange
    Size 70 mm (3″)
    Power Handling 55 W Continuous Powerzdx
    110 W Peak Power
    Impedance 4 Ω
    Frequency Response 110 ÷ 5700 Hz
    Sensitivity 85,6 dB/Spl
    Magnet N38 “H-grade” Neodymium
    Cone TPX®

  • TH 6.5 II Sax

    Technical Data
    Comp Woofer
    Size 165 mm (6.5″)
    Power Handling 150 W Continuous Power
    300 W Peak Power
    Impedance 4 Ω
    Frequency Response 40 ÷ 4500 Hz
    Sensitivity 87 dB/Spl
    Magnet N48 “H-grade” Neodymium
    Cone TPX®

  • TH quattro

    FOUR CHANNEL POWER AMPLIFIER

    Thesis amplifiers are born with the know-how and experience achieved with the HV venti, improved by the innovation of digital technology. The result is a perfect combination between the highest level of analog technology and the advanced features of the digital technology in one unique product. The precious synergy with Full DA HD technology takes the in-car listening experience to a new level of excellence; the synthesis of a unique know-how employed in mobile audio reproduction.

    TH quattro is a four-channel amplifier fully adjustable and entirely manageable by the internal microprocessor, for limitless system configurations.

  • TH uno

    MONO POWER AMPLIFIER

    Thesis amplifiers are born with the know-how and experience achieved with the HV venti, improved by the innovation of digital technology. The result is a perfect combination between the highest level of analog technology and the advanced features of the digital technology in one unique product. The precious synergy with Full DA HD technology takes the in-car listening experience to a new level of excellence; the synthesis of a unique know-how employed in mobile audio reproduction.

    TH uno is a single channel (mono) amplifier used to achieve maximum performance under any load; capable of delivering up to 2300 W into 1 Ohm and 200 W in the audiophile A Class mode. Specifically designed to drive systems and subwoofers with self-assured mastery.

  • Thesis HV venti

    THG 6.5 II optional mesh grilles can be defined with only one word: unique. They are made with finest steel without any compromise, to overcome the absolute.

  • USS4
    SKU: USS4

    UNIVERSAL SPEAKERS SIMULATOR

    Some OEM sources/head-units have a test circuit that monitors the presence of a low-impedance load to enable audio outputs. When you connect this type of head-unit to the high-level inputs of an Audison bit processor, which has a high impedance load, audio outputs are silenced. By inserting the USS 4 between the source and the processor / amplifier, these problems are definitively solved. If there is a need to generate a remote signal to control the amplifier turn on/off, it is necessary to power* the USS4, providing the additional feature of the possibility to delay the signal from 1 to 8 seconds, so as to avoid annoying “bumps” upon ignition.

    * In countries where the legislation on electromagnetic compatibility is not mandatory under ECE / UN Regulation no. 10/5

Menu
Give Us a Call
Murrieta (951) 304-7444 | Montclair (909) 482-0555