Hertz

Image
SKU
Product
Rating
Price
  • C165L
    SKU: CX 690-1-1-1-1

    Component Woofer
    Size mm (in.) 165 (6.5)
    Power Handling – Continuous W 80
    Power Handling – Peak W 240
    Impedance Ohm 4
    Voice Coil Ø 25 (1)
    Frequency Response Hz 50 ÷ 5k
    Magnet size D x d x h mm (in.) 85 x 32 x 17 (3.35 x 1.26 x 0.67)
    Weight of one speaker kg (lb.) 0,973 (2.15)
    Magnet High density flux ferrite
    Cone Water repellent non pressed paper
    Xmech mm (in.) 6,1 (0.24)

  • C26
    SKU: CX 690-1

    Component Tweeter
    Size mm (in.) 26 (1)
    Power Handling – Peak W 120
    Power Handling – Peak Note (Hi-Pass filtered @ 2,5kHz – 12 dB Oct.)
    Impedance Ohm 4
    Voice Coil Ø 20(0.8)
    Frequency Response Hz 1.8k ÷ 22.5k
    Magnet size D x d x h mm (in.) 19 x 0 x 3 (0.75 x 0 x 0.12)
    Weight of one speaker kg (lb.) 0,04 (0.08)
    Magnet Neodymium
    Dome Tetolon

  • CK 130
    SKU: CPK 165-1

    Size mm (in.) 130 (5)
    Power Handling – Continuous W 70
    Power Handling – Peak W 210
    Impedance Ohm 4
    Tweeter diaphragm mm (in.) 26 (1)
    Woofer Voice Coil Ø mm (in.) 25 (1)
    Tweeter Voice Coil Ø mm (in.) 20 (0.8)
    Sensitivity dB SPL 92,5
    Frequency Response Hz 65 ÷ 22,5k
    Crossover Cut off 2,5 kHz @ 12 dB Oct.
    Crossover Type 2 Way Passive Crossover
    Weight of one component – Woofer 0,7 (1.54)
    Weight of one component – Tweeter kg (lb) 0,03 (0.07)
    Weight of one component – Crossover kg (lb) 0,185 (0.41)

  • CK 165
    SKU: CK 165

    Component System
    Size mm (in.) 165 (6.5)
    Power Handling – Continuous W 95
    Power Handling – Peak W 285
    Impedance Ohm 4
    Tweeter diaphragm mm (in.) 26 (1)
    Woofer Voice Coil Ø mm (in.) 25 (1)
    Tweeter Voice Coil Ø mm (in.) 20 (0.8)
    Sensitivity dB SPL 93
    Frequency Response Hz 55 ÷ 22,5k
    Crossover Cut off 2,5 kHz @ 12 dB Oct.
    Crossover Type 2 Way Passive Crossover
    Weight of one component – Woofer 0,96 (2.12)
    Weight of one component – Tweeter kg (lb) 0,03 (0.07)
    Weight of one component – Crossover kg (lb) 0,185 (0.41)

  • CK 165L
    SKU: CK 165-1

    Component System
    Size mm (in.) 165 (6.5)
    Power Handling – Continuous W 100
    Power Handling – Peak W 300
    Impedance Ohm 4
    Tweeter diaphragm mm (in.) 26 (1)
    Woofer Voice Coil Ø mm (in.) 25 (1)
    Tweeter Voice Coil Ø mm (in.) 20 (0.8)
    Sensitivity dB SPL Tweeter 92 – Woofer 91
    Frequency Response Hz 50 ÷ 22,5k
    Crossover Cut off LP 6 dB / Oct. / 3,8 KHz – HP 12 dB / Oct. / 3,8 KHz
    Crossover Type 2 Way Passive Crossover
    Weight of one component – Woofer 0,973 (2.15)
    Weight of one component – Tweeter kg (lb) 0,037 (0.08)
    Weight of one component – Crossover kg (lb) 0,037 (0.08)

  • CPK 165
    SKU: CPK 165

    Technical Specs

    Component System
    Size mm (in.) 165 (6.5)
    Power Handling – Continuous W 105
    Power Handling – Peak W 315
    Impedance Ohm 4
    Tweeter diaphragm mm (in.) 29 (1.14)
    Woofer Voice Coil Ø mm (in.) 25 (1)
    Tweeter Voice Coil Ø mm (in.) 25 (1)
    Sensitivity dB SPL 92,5
    Frequency Response Hz 45 ÷ 22,5k
    Crossover Cut off 2,8 kHz @ 12 dB Oct.
    Crossover Type 2 Way Passive Crossover
    Weight of one component – Woofer 1.07 (2.36)
    Weight of one component – Tweeter kg (lb) 0.07 (0.15)
    Weight of one component – Crossover kg (lb) 0,2 (0.44)

  • HCP 2
    SKU: HCP 2

    General Specs

    Channels 2 – 1
    POWER SUPPLY
    Power supply voltage / fuse: 11 ÷ 15 VDC / 1 x 20 A
    Idling current (power ON/OFF) 0.4 A / 0.04 mA
    Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 12 A
    Remote In: 7 ÷ 15 VDC – 1 mA
    ART: Automatic Remote Turn-On/Off with Speaker-In
    AMPLIFIER STAGE
    Distorsion – THD (100 Hz @ 4 Ω) 0.01 %
    Bandwidth: 10 ÷ 65k Hz
    S/N Ratio (A weighted @ 1 V): 103 dB
    Damping factor (100 Hz @ 4 Ω): 200
    Pre-In sensitivity: 0.2 ÷ 5 VRMS
    Speaker-In sensitivity: 0.8 ÷ 20 VRMS
    Load impedance (MIN)
    @ 2 Ch: 2 Ω
    @ 1 Ch: 4 Ω
    Max size (mm / in.): 215 x 190 x 50 / 8.46 x 7.48 x 1.97
    Weight (kg / lb.): 1.80 / 3.96
    Adjustable Crossovers yes

  • HCP 2X
    SKU: HCP 2X

    General Specs

    Channels 2 – 1
    POWER SUPPLY
    Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A
    Idling current (power ON/OFF) 0. 6 A / 0.4 mA
    Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 20 A
    Remote In: 7 ÷ 15 VDC – 1 mA
    ART: Automatic Remote Turn-On/Off with Speaker-In
    AMPLIFIER STAGE
    Distorsion – THD (100 Hz @ 4 Ω): 0.03 %
    Bandwidth: 10 ÷ 65k Hz
    S/N Ratio (A weighted @ 1 V): 105 dB
    Damping factor (100 Hz @ 4 Ω): 300
    Pre-In sensitivity: 0.2 ÷ 5 VRMS
    Speaker-In sensitivity: 0.8 ÷ 20 VRMS
    Load impedance (MIN)
    @ 2 Ch: 2 Ω
    @ 1 Ch: 4 Ω
    Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97
    Weight (kg / lb.): 2.57 / 5.66
    Adjustable Crossovers yes

  • HCP 4
    SKU: HCP 4

    General Specs

    Channels 4 – 3 – 2
    POWER SUPPLY
    Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A
    Idling current (power ON/OFF) 1 A / 0.04 mA
    Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 21 A
    Remote In: 7 ÷ 15 VDC – 1 mA
    ART: Automatic Remote Turn-On/Off with Speaker-In
    AMPLIFIER STAGE
    Distorsion – THD (100 Hz @ 4Ω): 0.01 %
    Bandwidth: 10 ÷ 45K Hz
    S/N Ratio (A weighted @ 1 V) 103 dB
    Damping factor (100 Hz @ 4 Ω): 120
    Pre-In sensitivity 0.2 ÷ 5 VRMS
    Speaker-In sensitivity: 0.8 ÷ 20 VRMS
    Load impedance (MIN)
    @ 4 Ch: 2 Ω
    @ 3 Ch: 2 Ω + 2 Ω + 4 Ω
    @ 2 Ch: 4 Ω
    Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97
    Weight (kg / lb.): 2.62 / 5.77
    Adjustable Crossovers yes

  • HCP 4D
    SKU: HCP 4D

    General Specs
    Channels 4 – 3 – 2
    POWER SUPPLY
    Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 20 A
    Idling current (power ON/OFF) 1.6 A / 0.04 mA
    Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 22 A
    Remote In: 7 ÷ 15 VDC – 1 mA
    ART Automatic Remote Turn-On/Off with Speaker-In
    AMPLIFIER STAGE
    Distorsion – THD (100 Hz @ 4 Ω) 0.02 %
    Bandwidth: 10 ÷ 60K Hz
    S/N Ratio (A weighted @ 1 V) 100 dB
    Damping factor (100 Hz @ 4 Ω): 200
    Pre-In sensitivity 0.2 ÷ 5 VRMS
    Speaker-In sensitivity: 0.8 ÷ 20 VRMS
    Load impedance (MIN)
    @ 4 Ch: 2 Ω
    @ 3 Ch: 2 Ω + 2 Ω + 4 Ω
    @ 2 Ch: 4 Ω
    Max size (mm / in.): 215 x 190 x 50 / 8.46 x 7.48 x 1.97
    Weight (kg / lb.): 1.94 / 4.27
    Adjustable Crossovers yes

  • HCP4DK
    SKU: HCP4DK

    General Specs
    Channels 4 – 3 – 2
    POWER SUPPLY
    Power supply voltage / fuse: 11 ÷ 15 VDC / 2 x 35 A
    Idling current (power ON/OFF) 1.6 A / 0.05 mA
    Consumption @ 2 Ω, 14.4 VDC (Max Musical Power): 40 A
    Remote In: 4 ÷ 16 VDC – 1 mA
    ART: Automatic Remote Turn-On/Off with Speaker-In
    AMPLIFIER STAGE
    Distorsion – THD (100 Hz @ 4 Ω): 0.03%
    Bandwidth: 10 ÷ 35k Hz
    S/N Ratio (A weighted @ 1 V): 105 dB
    Damping factor (100 Hz @ 4 Ω): 200
    Pre-In sensitivity: 0.2 ÷ 5 VRMS
    Speaker-In sensitivity: 0.8 ÷ 20 VRMS
    Load impedance (MIN)
    @ 4 Ch: 2 Ω
    @ 3 Ch: 2 Ω + 2 Ω + 4 Ω
    @ 2 Ch: 4 Ω
    Max size (mm / in.): 315 x 190 x 50 / 12.40 x 7.48 x 1.97
    Weight (kg / lb.): 2,73 / 6.01
    Adjustable Crossovers yes

  • HERTZ Cento Pro Series CPK-690
    SKU: CPK 690
    • Component: 2-Way System
    • Crossover: 2-Way Passive Crossover
    • Tweeter Magnet: Neodymium
    • Woofer Cone: Pressed Paper Cone
    • Tweeter Dome: Tetolon
Menu
Give Us a Call
Murrieta (951) 304-7444 | Montclair (909) 482-0555