Latest Products
-
Rockford Fosgate RFIT-20
49.99$
-
Rockford Fosgate RFIT-16
46.99$
-
Rockford Fosgate RFIT-10
34.99$
-
Component Woofer
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 125
Power Handling – Peak W 250
Impedance Ohm 4
Voice Coil Ø 36 (1.4)
Frequency Response Hz 40 – 6.5k
Magnet size D x d x h mm (in.) 80 x 45 x 5 (3.15 x 1.77 x 0.2)
Weight of one speaker kg (lb.) 1,29 (2.84)
Magnet Neodymium
Cone Pressed-pulp cone with cotton fibres
Xmech mm (in.) ±9 (0.35) -
Component Woofer
Size mm (in.) 180 (7)
Power Handling – Continuous W 200
Power Handling – Peak W 400
Impedance Ohm 4
Voice Coil Ø 50 (2)
Frequency Response Hz 38 – 6k
Magnet size D x d x h mm (in.) 90 x 60,7 x 5 (3.54 x 2.39 x 0.2)
Weight of one speaker kg (lb.) 1,71 (3.77)
Magnet Neodymium
Cone Pressed-pulp cone with cotton fibres
Xmech mm (in.) ±10 (0.4) -
Size mm (in.) 200 (8)
Power Handling – Continuous W 700
Power Handling – Peak W 1400
Impedance Ohm 4
Voice Coil Type single
No Filter Component Subwoofers
Voice Coil Ø 100 (4)
Frequency Response Hz 30 ÷ 600
Magnet size D x d x h mm (in.) 95 x 28 x 5 (3.7 x 1.1 x 0.2)
Weight of one component kg (lb.) 6,120 (13.5)
Magnet Neodymium
Cone Pressed-pulp cone with mineral powders
Xmech mm (in.) ±23 (0.9) -
Size mm (in.) 250 (10)
Power Handling – Continuous W 700
Power Handling – Peak W 1400
Impedance Ohm 4
No Filter Component Subwoofers
Voice Coil Ø 100 (4)
Frequency Response Hz 27 ÷ 500
Magnet size D x d x h mm (in.) 95 x 28 x 6 D x d x h (in.) (3.7 x 1.1 x 0.24)
Weight of one component kg (lb.) 7,5 (16.53)
Magnet Neodymium
Cone Pressed-pulp cone with mineral powders
Xmech mm (in.) ±27 (1.06) -
Component Tweeter
Size mm (in.) 35 (1.38)
Power Handling – Peak W 180
Power Handling – Peak Note (Hi-Pass filtered @ 1,8kHz – 12dB Oct.)
Impedance Ohm 4
Voice Coil Ø 28 (1.1)
Frequency Response Hz 1k – 28k
Magnet size D x d x h mm (in.) 27,8 x 3,5 x 3 (1.1 x 0.14 x 0.12)
Weight of one speaker kg (lb.) 0,10 (0.22)
Magnet Neodymium
Dome Tetolon -
Component Mid-range
Size mm (in.) 70 (3)
Power Handling – Peak W 100
Power Handling – Peak Note (Hi-Pass filtered @ 250Hz – 12dB Oct.)
Impedance Ohm 4
Voice Coil Ø 20 (0.8)
Frequency Response Hz 200 – 20k
Magnet size D x d x h mm (in.) 45 x 25 x 3,5 (1.77 x 0.98 x 0.13)
Weight of one speaker kg (lb.) 0,21 (0.46)
Magnet Neodymium
Cone Pressed-pulp cone with cotton fibres -
General Specs
Channels 1
Power supply voltage: 11÷15 VDC
Idling current: 2 A
Idling current when off: 0.04 mA
Consumption @ 1Ω, 14.4 VDC
(Max Musical Power) 83.5 A
Distorsion – THD (100 Hz @ 4Ω): 0.08 %
Bandwidth (-3 dB): 18 ÷ 500 Hz
S/N Ratio (A weighted @ 1 V) 105 dB
Damping factor (100 Hz @ 4Ω): 100
Pre-In sensitivity: 0.2 ÷ 5 V RMS
Pre-In impedance: 15 kΩ
Speaker-In sensitivity: 0.8 ÷ 20 V RMS
Speaker-In impedance: 470 Ω
Load impedance:
1 Ch
4 ÷ 1Ω
Remote In: 4 ÷ 15 VDC – 1 mA
ART™: Automatic Remote Turn-On/Off with Speaker-In
Fuse: 3 x 40 A
Max size (mm/inches): 170 x 349 x 46.70 / 6.69 x 13.74 x 1.84
Weight (kg/lb): 3.09 / 6.81
Adjustable Crossovers yes -
General Specs
Channels 5 – 3
Power supply voltage: 11÷15 VDC
Idling current: 3 A
Idling current when off: 0.04 mA
Consumption @ 1Ω, 14.4 VDC
(Max Musical Power) 50 A
Distorsion – THD (100 Hz @ 4Ω): 0.08 %
Bandwidth A & B Ch (-3 dB): 5 ÷ 50k Hz
Bandwidth C Ch (-3 dB): 5 ÷ 500 Hz
S/N Ratio A & B Ch (A weighted @ 1 V) 100 dB
S/N Ratio C Ch (A weighted @ 1 V): 106 dB
Damping factor A & B Ch (100 Hz @ 4Ω): 50
Damping factor C Ch (100 Hz @ 4Ω): 90
Pre-In sensitivity: 0.2 ÷ 5 V RMS
Pre-In impedance: 15 kΩ
Speaker-In sensitivity: 0.8 ÷ 20 V RMS
Speaker-In impedance: 470 Ω
Load impedance:
5 Ch
3 Ch
4 x 2Ω + 1 x 2Ω
2 x 4Ω + 1 x 2Ω
Remote In: 4 ÷ 15 VDC – 1 mA
ART™: Automatic Remote Turn-On/Off with Speaker-In
Fuse: 2 x 40 A
Max size (mm/inches): 170 x 349 x 46.70 / 6.69 x 13.74 x 1.84
Weight (kg/lb):
Adjustable Crossovers yes -
Brand HERTZ
Speaker Type Woofer
Mounting Type Car Mount
Unit Count 1.0 Count
Speaker Maximum Output Power 300 WattsAbout this item
Component: 2-Way Passive Crossover
Weight: 1.26
Dimensions (W x H x D): 7.67 x 4.68 x 1.61
Bi-Amplification Available
Tweeter: +2 /0/-2 dBNote: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
-
Component System
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 150
Power Handling – Peak W 300
Impedance Ohm 4
Tweeter diaphragm mm (in.) 35 (1.38)
Woofer Voice Coil Ø mm (in.) 36 (1.4)
Tweeter Voice Coil Ø mm (in.) 28 (1.1)
Sensitivity dB SPL 91
Frequency Response Hz 40 ÷ 25k
Crossover Cut off 3.5 kHz – 12 dB Oct
Crossover Type 2 Way Passive Crossover
Weight of one component – Woofer 1,65 (3.64)
Weight of one component – Tweeter kg (lb) 0,075 (0.16)
Weight of one component – Crossover kg (lb) 0,37 (0.82) -
Component System
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 150
Power Handling – Peak W 300
Impedance Ohm 4
Tweeter diaphragm mm (in.) 35 (1.38)
Woofer Voice Coil Ø mm (in.) 36 (1.4)
Tweeter Voice Coil Ø mm (in.) 28 (1.1)
Sensitivity dB SPL 92
Frequency Response Hz 40 ÷ 25k
Crossover Cut off 2.5 kHz (Mid/Hi-Cont. = ON) 3.5 kHz (Mid/Hi-Cont. = OFF)
Crossover Type 2 Way Passive Crossover
Weight of one component – Woofer 1.29 (2.84)
Weight of one component – Tweeter kg (lb) 0,1 (0.22)
Weight of one component – Crossover kg (lb) 0,57 (1.26)
Showing 49–60 of 85 results