Car Audio Experts
Select a vehicle to find exact fit parts
Image
Product
Price
-
- One shallow-mount 12″ Dual 4-ohm voice coil woofer
- Eight 1-1/8″ Self-tapping screws
- 4mm Allen bit
- Installation and Operation manu
-
- Connector Type: RJ45 (8-conductor non-flipped)
- Mounting: Under Dash
- Cable Length: 16.5-feet (503 cm)
- Remote wired bass/treble boost, For use with select 2007 and newer PUNCH and POWER amplifiers.
- 0dB to +18dB bass boost @ 45 Hz
- 0dB to +12dB treble boost @ 12.5 kHz
- Bass/Treble filtering based upon in-board amplifier crossover setting (HP-LP-AP)
- Includes bass knob, cable, mounting clip, mounting screws
-
- Rockford Fosgate RF-HLC high level speaker signal to low level RCA Adapter
- Speaker Level to RCA
- High to Low Adapter
- Package weight: 1.0 lbs
-
- 4-Channel high-level to low-level signal converter
- 12″ Speaker-level harness
- Instructions on packaging
-
- Output Voltage: 800 mV
- Operating Voltage: 9-16 VDC 8″ long coaxial power -to- bare wire +/- Connector Type C: 3.8 mm OD, 1.4 mm ID
- Frequency Response: 20 Hz – 20 kHz
- Signal Processing: Bluetooth™ Profile: V3.0 + EDR
- Dimensions (H x W x D): 0.51″ x 1.90″ x 1.95″ (13 mm x 48 mm x 49 mm)
- Processor Type: Streaming Device
- Shipping Weight: 0.28 Lbs. (0.127 Kg.)
- Mounting: Dash/Surface Mount
- Signal-to-Noise: >90 dB (DAC) >80 dB (Max Output) THD+N <1.0
- Signal Output: 2-ch audio 3 ft. (1m) long output cable 1/8″ (3.5mm) stereo -to- L/R male RCA
- Signal Input: Wireless Bluetooth
- LED Indicators: Power: Center Solid Blue Pairing: Left/Right Blinking Blue Connected: All Solid Blue
-
- 2 Empty speaker pods
- 2 Speaker harnesses
- 2 Self-adhesive foam pads
- 6 Screws
- 6 Nuts
- 12 Washers
- 6 Wire-ties
- Installation & Operation booklet
-
- Empty subwoofer enclosure
- Large bracket
- Small bracket
- 14″ Red wire lead
- Wire-clamp
- 4 Long bolts
- 4 Short bolts
- Nut
- Installation & Operation booklet
-
- Wiring harness (inline 60A Maxi-fuse)
- 4 Screws
- 6 Wire-ties
- 4 Wire-clamps
- Installation & Operation booklet
-
- Dash bezel
- PMX-2 harness
- PMX-0 harness
- Power harness
- PMX-2 housing
- PMX-0 housing
- Metal bracket
- 8 Small screws
- 2 Large screws
- 4 Butt-connectors
- 5 Wire-ties
- Installation/Operation Booklet
-
This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier.
-
- 14.5″ Speaker level-to-RCA adapter (4 bare wires on one end and two female RCA jacks on other end)
-
- 10 feet (3 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
Showing 277–288 of 397 results