Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier.
-
- 14.5″ Speaker level-to-RCA adapter (4 bare wires on one end and two female RCA jacks on other end)
-
- 10 feet (3 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
-
- 16 feet (4.8 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
-
- 20 feet (6 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
-
- 3 feet (1 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
-
- 6 feet (1.8 meters) dual twist RCA cable with woven outer shield. Dual twist design for excellent noise rejection, 6-cut connector and split center pin for a secure connection, woven outer shield for durability.
-
- One 17′ Power cable (1/0-gauge) in a red translucent jacket
- 3′ Ground cable (1/0-gauge) in a translucent gray jacket (with a ring terminal on one end)
- 20′ Turn-on lead in a blue jacket
- ANL fuse holder (top cover and bottom plate)
- 300-amp ANL-fuse (installed in fuse holder)
- 2 Power rings
- Ten 4″ wire ties
- Plastic grommet
- 5 Plastic butt connectors
- 5 Female quick slide connectors
- 6 Male quick slide connectors
- 2 Black rubber boots
- Bolt with 2 nuts/2 lock-washers/3 star-washers installed
-
- 17′ Power cable (1/0-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
- 300A MAXI fuse (installed in fuse holder)
- 3′ Ground cable (1/0-gauge) in a gray translucent jacket (with a ring terminal on one end)
- 4′ Power cable (4-gauge) in a red translucent jacket
- 4′ Ground cable (4-gauge) in a gray translucent jacket
- 2 Distribution blocks (One 1/0-gauge in/two 4-gauge out)
- Three 16′ twisted pair RCA patch cords
- 30′ Length of 16-AWG speaker wire
- 20′ Length of turn-on lead in a blue jacket
- Ten 4″ wire ties
- Plastic bag containing the following:
- Crimp-on ring terminal for 1/0-gauge wire
- Large black rubber boot
- Plastic 1/0 gauge-sized grommet
- 2 Red plastic butt connectors
- Crimp-on female 0.25″ quick slide connector
- Crimp-on spade connector
- Red rubber boot
- GM battery post bolt with 2 nuts/2 lock-washers/3 star-washers installed
- 2 Rubber washers
- Decal with model and serial numbers
-
- One 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line fuse holder and a ring terminal on the battery end)
- 3′ Ground cable (4-gauge) in a translucent gray jacket (with a ring terminal on one end)
- 20′ Turn-on lead in a blue jacket
- 100-amp Maxi-fuse
- Power Ring
- Ten 4″ wire ties
- Plastic grommet
- 2 Plastic butt connectors
- Female quick slide connector
- Male quick slide connector
- Small red rubber boot
- Large black rubber boot
-
- 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
- 3′ Ground cable (4-gauge) in a gray translucent jacket (with a ring terminal on one end)
- 6′ Power cable (8-gauge) in a red translucent jacket
- 6′ Ground cable (8-gauge) in a gray translucent jacket
- 2 Distribution blocks (One 4-gauge in/Three 8-gauge out)
- Two 16′ twisted pair RCA patch cords
- 30′ Length of 16-AWG speaker wire
- 20′ Length of turn-on lead in a blue jacket
- Ten 4″ wire ties
- Plastic bag containing the following:
- Crimp-on ring terminal for 4-gauge wire
- Large black rubber boot
- 100A MAXI fuse
- Plastic 4 gauge-sized grommet
- 2 Red plastic butt connectors
- 5 Crimp-on female 0.25″ quick slide connectors
- 5 Crimp-on spade connectors
- 3 Red rubber boots
- 2 Black rubber boots
- Decal with model and serial numbers
-
- One 17′ Power cable (4-gauge) in a red translucent jacket (has an in-line MAXI fuse holder and a ring terminal on the battery end)
- 100-amp MAXI fuse
- 3′ Ground cable (4-gauge) in a translucent gray jacket (with a ring terminal on one end)
- 16′ Twisted pair RCA patch cord
- 20′ Turn-on lead (18-gauge) in a blue jacket
- One 4-gauge crimp-on spade connector
- Black insulating boot
- One 18-gauge crimp-on spade connector
- Red insulating boot
- One crimp-on female 0.25″ quick slide connector
- Ten 3″ zip-ties
- 1 Plastic grommet
- 2 Plastic butt connectors
- Decal with model and serial numbers
Showing 73–84 of 98 results