Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
- Rockford Fosgate RF-HLC high level speaker signal to low level RCA Adapter
- Speaker Level to RCA
- High to Low Adapter
- Package weight: 1.0 lbs
-
This high level speaker wire to RCA adaptor is an economic way to connect a factory OEM source unit to an amplifier.
-
- PMX-3 Marine Media Receiver:
- Marine digital media receiver
- Trim-ring
- Mounting plate
- Mounting bracket
- Wiring harness
- Backstrap
- 4 Machine screws
- 4 Hex-nuts
- Installation/Operation booklet
- RZR14-DK Radio Mounting Kit:
- Trim-panel
- Metal mounting plate
- Plastic mounting frame
- 2 Outer trim-panels (upper/lower)
- 36″ 12-Pin power/ground/speaker harness
- 6′ Wire antenna (Motorola plug on one end / bare-ended wire on other end)
- 24 Hex-socket screws
- Rockford Fosgate Contact information
- M5-1500X5 Amplifier:
- 5-Channel powersports amplifier
- 11″ Power/ground/turn-on & subwoofer output harness (installed on amp)
- 11″ Input harness (installed on amp)
- Three 14″ RCA-to-Molex input adapters
- Power/ground/turn-on adapter plug
- Subwoofer output adapter plug
- Two 7.5″ speaker output harnesses
- 3mm Allen key
- Owner’s manual
- Performance certificate
- Contact information
- M2WL-8HB Wake Tower Speakers:
- Two M2 8″ waketower speakers (black) w/stainless steel grilles
- 2 Plastic sport grilles (black)
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Contact information card
- M2-65B Speakers:
- Two 6.5″ 2-way marine speakers
- 2 Centrex plastic grilles (Black)
- 2 Stainless steel grilles
- 2 Grille rings (Black)
- Two 11″ LED power harnesses with 4-pin Deutsch connectors on one end
- Twelve 1-3/4″ Stainless steel Allen head screws
- 3mm Allen head bit
- 3.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- M2D4-10IB Subwoofer:
- One 10″ marine subwoofer
- 1 Centrex plastic grille (black)
- 1 Stainless steel grille
- 1 Grille ring (black)
- One 11″ LED power harness with 4-pin Deutsch connector on one end
- Six 2-3/8″ Stainless steel Allen head screws
- 4mm Allen head bit
- 4.5mm Drill bit
- Instruction manual (English/ French/ Spanish/ German/ Italian)
- PMX-RGB Color Optix Light Controller:
- LED Controller w/ attached 17″ LED cables and 17″ power/ground harness (inline 2A ATC fuse)
- 6″ Power/ground harness adapter
- Two 3/4″ machine-screws
- 2 Nuts
- 2 Lock-washers
- Installation manual
- RZR14-FWE Subwoofer Enclosure:
- Sub enclosure w/ attached 28″ internal speaker wire
- 30″ Wiring harness
- Two 1″ screws
- 2 Flat-washers
- Two 1-1/2″ adhesive foam pads
- One 14″ section of bare-ended red wire
- Five 8″ zip-ties
- One 14″ zip-tie
- 1 Port plug
- Rockford Fosgate contact information
- RZR14-FSE Speaker Pods:
- 2 Empty speaker pods w/ attached 38″ wire harness
- 2 Threaded studs
- 4 Mounting screws
- 2 Mounting bolts
- 6 Washers
- Hex-head screwdriver
- Five 8″ zip-ties
- Rockford Fosgate contact information
- RZR14-K4 Amplifier Wiring Kit:
- 9.5′ Power/ground/speaker harness (4 AWG w/ inline fuse-holder and 100A Maxi fuse installed)
- 30″ Front/Rear RCA to Molex harness
- 2 Amplifier mounting plates
- Two 25mm Torx-socket screws (T30)
- One 12mm Torx-socket screw (T30)
- Four 10mm Torx-socket screws (T10)
- Twenty 8″ Wire-ties
- Four 6″ zip-ties w/ push-fastener ends
- Rockford Fosgate contact information
- MX-RSW16 Speaker Harnesses:
- Two 17.5′ Rear speaker harnesses
- Six 6″ wire-ties w/ push-fastener ends
- Sixteen 7.5″ wire-ties
- Contact information card
-
- Two Woofers
- 2 Woofer grilles
- Two 1″ Tweeters (with attached 6″ wires)
- 2 Tweeter trim rings
- 2 Flush mount top tweeter clamps
- 2 Flush mount rear tweeter clamps
- 2 Angled surface mount tweeter housings
- 2 Crossovers
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Two M4 nuts
- 2 Split lock washers
- Eight 1-3/4″ Allen head screws
- Sixteen 1″ Allen head screws
- 3mm Allen head bit
- 2mm Allen wrench
- Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)
-
- Two 2-way speakers
- Two 6×8 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- Two 2-way speakers
- 2 Grilles
- Two 6×9 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- Two 2-way speakers
- 2 Grilles
- Two 6×9/5×7 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- 2 Two-way speakers
- 2 Grilles
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- 2 Woofers
- 2 Woofer grilles
- 2 Tweeters (6″ speaker wire attached terminated with female quick-slide connectors)
- 2 Crossovers
- 2 Front flush mount brackets
- 2 Rear flush mount brackets
- 2 Angled surface mounting housings
- 2 Polished tweeter trim rings
- 2 Brushed tweeter trim rings
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
-
- Two 6-3/4″ Two-way speakers
- 2 Grilles
- Two 6×9/5×7 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- Two 6-3/4″ Woofers
- 2 Woofer grilles
- Two 1″ Tweeters (with attached 6″ speaker wire terminated with female quick-slide connectors)
- 2 Crossovers
- 2 Front flush mount tweeter brackets
- 2 Rear flush mount tweeter brackets
- 2 Surface mount tweeter housings
- 4 Tweeter trim rings
- Two 6×9/5×7 Adapter brackets
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation Instructions (English/ French/ Spanish/ German/ Italian)
-
- Two 2-way speakers
- 2 Grilles
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
Showing 169–180 of 188 results