Latest Products
-
Rockford Fosgate RFIT-20
CALL FOR PRICE
-
Rockford Fosgate RFIT-16
CALL FOR PRICE
-
Rockford Fosgate RFIT-10
CALL FOR PRICE
Image
Product
Price
-
- PMX-2:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M1WL-65MB:
- Two M1 6.5″ Color Optix moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- M1D4-10B:
- 10″ DVC subwoofer with Color Optix grille
- RZR19PXP-M1FWE:
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- PMX-3:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-65MB:
- Two M2 6.5″ Moto-can speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- PMX-3:Marine digital media receiver with attached 5″ wiring harness
- RZR19PXP-DK:
- Dash kit for PMX headunit
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-8HB:
- Two M2 8″ waketower speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- Four 1/2″ hex-socket screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M1WL-65MB:
- Two M1 6.5″ Color Optix moto-Can speakers w/installed sport grille
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- RZR19PXP-M1FWE:
- M1D4-10B 10″ DVC subwoofer with Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-65MB:
- Two M2 6.5″ Color Optix moto-Can speakers w/installed stainless-steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 1.0″ – 1.6″ rubber shims w/mounting hardware (four 1-3/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.6″ – 2.0″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- T-45 Torx wrench
- RZR19PXP-M2FWE:
- M2D4-10B 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- M5-1500X5:
- 5-Channel powersports amplifier attached to mounting bracket
- 11″ Power/ground/turn-on & subwoofer output harness (installed)
- 11″ Input harness (installed)
- Amplifier power certificate
- RZR19PXP-FSE:
- Two enclosures loaded with 6.5″ 2-way Color Optix speakers (attached 5″ input/tweeter output harnesses)
- Two 16″ tweeter harnesses with inline crossovers
- 2 Rubber caps
- Dash trim piece
- Torx screwdriver
- RZR19PXP-RCA:
- 30″ Ride Command active noise reduction interface
- PMX-RGB:
- Color Optix Light controller mounted to bracket (attached 1.5′ power/ground/RGB harnesses w/inline 2A ATO fuse)
- M2-TS:
- 2 Tweeters (with attached 12″ speaker wire terminated with proprietary plugs)
- 2 Crossovers
- 2 Front flush mount trim rings
- Two M4x25mm Machine screws
- Eight 1-3/4″ Stainless steel Allen head screws
- Eight 1″ Stainless steel Allen head screws
- Six 3/8″ Stainless steel Allen head screws
- 3mm Allen head bit
- Eight 7″ Zip-ties
- Installation/Operation instructions (En/ Fr/ Sp/ Others)
- M2WL-8HB:
- Two M2 8″ waketower speakers w/stainless steel grilles
- 2 Upper mounting brackets
- 2 Lower mounting brackets
- Four 2.5″ – 3.0″ rubber shims w/mounting hardware (four 2-5/8″ bolts / 4 flat washers / 4 lock washers)
- Four 1.5″ – 2.5″ rubber shims w/mounting hardware (four 1-3/4″ bolts / 4 flat washers / 4 lock washers)
- Two 12″ 6-pin wire harnesses w/Deutsch connectors
- 2 Connection cover-plates
- 4 Plastic grommets
- 1/8″ Hex bit
- T-45 Torx wrench
- Instruction manual
- Rockford Fosgate Contact information card
- RZR19PXP-M2FWE:
- M2D4-10IB 10″ DVC subwoofer with stainless-steel Color Optix grille
- Subwoofer enclosure with attached internal 16″ speaker harness
- Add-on enclosure chamber
- 3 Mounting brackets
- Port plug
- RZR19PXP-K4:
- Pre-configured 15′ wiring harness with 4 AWG Power/ground wires and inline Maxi fuse holder
- Two 10″ foam strips with 3M adhesive backing
- Thirty-two 14″ Wire ties
- Twenty-five 8″ wire ties
- Ten 6″ wire ties with push-fasteners
- Twelve 7″ wire ties with clips
- One rubber grommet
- 1.75″ Hole saw with bit
- Hardware Pack:
- 2 Moto-can terminal covers
- Allen key
- 100A Maxi fuse
- 1 Tube of grease
- Amp mounting clamp with nut and washer
- Nine 7/8″ screws
- Eight 3/4″ screws
- Two 3/4″ Torx screws
- 4 Speed-clips
- Four 1-1/2″ Torx bolts
- Three 25mm Torx bolts
- Six 60mm screws
- 4 Flat-washers
- 2 Lock-washers
- Hex-head bit
-
- Two Woofers
- 2 Woofer grilles
- Two 1″ Tweeters (with attached 6″ wires)
- 2 Tweeter trim rings
- 2 Flush mount top tweeter clamps
- 2 Flush mount rear tweeter clamps
- 2 Angled surface mount tweeter housings
- 2 Crossovers
- Two M4x25mm Machine screws
- Two M4x10mm Machine screws
- Two M4x15mm Stud bolts
- Two M4 nuts
- 2 Split lock washers
- Eight 1-3/4″ Allen head screws
- Sixteen 1″ Allen head screws
- 3mm Allen head bit
- 2mm Allen wrench
- Installation/Operation instructions (English/ French/ Spanish/ German/ Italian)
-
- Mono-channel amplifier
- Four 1-1/2″ Self-tapping screws
- Installation & Operation Manual (Eng/Fre/Spa)
- Power Amplifier Performance Verification Certificate
-
- Two 2-way speakers
- Two 6×8 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- Mono-channel amplifier
- Four 1-1/2″ Self-tapping screws
- Installation & Operation Manual (Eng/Fre/Spa)
- Power Amplifier Performance Verification Certificate
-
- Two 2-way speakers
- 2 Grilles
- Two 6×9 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
-
- Two 2-way speakers
- 2 Grilles
- Two 6×9/5×7 Adapter brackets
- Eight 1-1/4″ Allen head screws
- 3mm Allen head bit
- 8 Speed clips
- Installation/Operation manual (English/ French/ Spanish/ German/ Italian)
Showing 877–888 of 964 results