-
Technical Specs
Component System
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 105
Power Handling – Peak W 315
Impedance Ohm 4
Tweeter diaphragm mm (in.) 29 (1.14)
Woofer Voice Coil Ø mm (in.) 25 (1)
Tweeter Voice Coil Ø mm (in.) 25 (1)
Sensitivity dB SPL 92,5
Frequency Response Hz 45 ÷ 22,5k
Crossover Cut off 2,8 kHz @ 12 dB Oct.
Crossover Type 2 Way Passive Crossover
Weight of one component – Woofer 1.07 (2.36)
Weight of one component – Tweeter kg (lb) 0.07 (0.15)
Weight of one component – Crossover kg (lb) 0,2 (0.44) -
Brand HERTZ
Speaker Type Subwoofer
Subwoofer Diameter 10 Inches
Mounting Type Flush Mount
Unit Count 1.0 Count
About this item
Power Handling: 600 W Peak, 300 W RMS
Weight: 8.37 lbs
Magnet: Ferrite
Cone: Polyproyilene
Impedance: 4 ohmsNote: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.
-
Component Coaxials
Size mm (in.) 100 (4)
Power Handling – Continuous W 40
Power Handling – Peak W 120
Impedance Ohm 4
Woofer Voice Coil Ø mm (in.) 25 (1)
Tweeter Voice Coil Ø mm (in.) 13 (0.5)
Frequency Response Hz 80 ÷ 22k
Woofer Magnet size D x d x h mm (in.) 70 x 32 x 10 (2.76 x 1.26 x 0.39)
Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08)
Weight of one speaker kg (lb.) 0,47 (1.04)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Semi-pressed paper + Mica
Dome Tetolon
Xmech mm (in.) 2,9 (0.11) -
Component Coaxials
Size mm (in.) 130 (5)
Power Handling – Continuous W 50
Power Handling – Peak W 150
Impedance Ohm 4
Woofer Voice Coil Ø mm (in.) 25 (1)
Tweeter Voice Coil Ø mm (in.) 13 (0.5)
Frequency Response Hz 65 ÷ 22k
Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08)
Weight of one speaker kg (lb.) 0,73 (1.61)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Semi-pressed paper + Mica
Dome Tetolon
Xmech mm (in.) 3,8 (0.15) -
Component Coaxials
Size mm (in.) 165 (6.5)
Power Handling – Continuous W 70
Power Handling – Peak W 210
Impedance Ohm 4
Woofer Voice Coil Ø mm (in.) 25 (1)
Tweeter Voice Coil Ø mm (in.) 13 (0.5)
Frequency Response Hz 55 ÷ 22k
Woofer Magnet size D x d x h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08)
Weight of one speaker kg (lb.) 0,95 (2.09)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Semi-pressed paper+ Mica
Dome Tetolon
Xmech mm (in.) 4,9 (0.19) -
Component Coaxials
Size mm (in.) (5 x 7)
Power Handling – Continuous W 70
Power Handling – Peak W 210
Impedance Ohm 4
Frequency Response Hz 55 ÷ 22k
Woofer Magnet size D x d x h mm (in.) 85 x 32 x 15 (3.35 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.) 13 x 2 (0.51 x 0.08)
Weight of one speaker kg (lb.) 1,0 (2.2)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium -
Component Coaxials
Size mm (in.) (6 x 9)
Power Handling – Continuous W 100
Power Handling – Peak W 300
Impedance Ohm 4
Tweeter diaphragm mm (in.) 40 (1.58)
Woofer Voice Coil Ø mm (in.) 30 (1.2)
Tweeter Voice Coil Ø mm (in.) 28 (1.1)
Frequency Response Hz 40 ÷ 23k
Woofer Magnet size D x d x h mm (in.) 100 x 32 x 15 (3.94 x 1.26 x 0.59)
Tweeter Magnet size D x h mm (in.) 19 x 3 (0.75 x 0.12)
Weight of one speaker kg (lb.) 1,55 (3.42)
Woofer Magnet High density flux ferrite
Tweeter Magnet Neodymium
Cone Semi-pressed paper + Mica
Dome PEI
Xmech mm (in.) 5,5 (0.22) -
6-channel car amplifier with digital signal processing
-
Flow Formed Technology (FFT): the rim is forged at high pressure while the wheel is spun at high speed, enhancing alloy strength and reducing rotational mass for improved performance.
-
DIGITAL REMOTE CONTROL
Digital Remote Control permits the control of the main system without the use of a PC. Installed in an ergonomic position within the dashboard of the car, the user can: choose between two “tuning” configurations pre-sets created and saved using the bit software; select the source from the master, auxiliary and optical digital inputs; adjust main system functions (volume, balance, fader and subwoofer volume); identify the proper position of the sources output level set while tuning the bit processor as well as adjust the display brightness and to reduce glare during night driving.
Showing 97–108 of 1504 results