-
- One shallow-mount 12″ Dual 2-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/8″ Allen head self-tapping screws
- 4mm Allen head bit
- Installation and Operation Manual (English/ French/ Spanish/ German)
-
- One shallow-mount 8″ Dual 2-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/4″ Self-tapping Allen head screws
- 4mm Allen bit
- Installation and Operation Manual (English/ French/ Spanish/ German)
-
- One shallow-mount 10″ Dual 4-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/8″ Allen head self-tapping screws
- 4mm Allen head bit
- Installation and Operation Manual (English/ French/ Spanish/ German)
-
- One shallow-mount 12″ Dual 4-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/8″ Allen head self-tapping screws
- 4mm Allen head bit
- Installation and Operation Manual (English/ French/ Spanish/ German)
-
- One shallow-mount 8″ Dual 4-ohm voice coil woofer
- 1 Aluminum trim ring
- Eight 1-1/4″ Self-tapping Allen head screws
- 4mm Allen bit
- Installation and Operation manual (English/ French/ Spanish/ German)
-
- Inserts snugly into Gen-2 P3S trim rings.
- Sized to fit Gen-2 P3S woofers.
- Protects against surround and cone damage.
- Stamped mesh grille insert.
-
- Inserts snugly into Gen-2 P3S trim rings.
- Sized to fit Gen-2 P3S woofers.
- Protects against surround and cone damage.
- Stamped mesh grille insert.
-
- One 8″ Subwoofer grille insert
- Mounting diagram on packaging
- Rockford Fosgate P3SG-8 owner’s manual
-
The P400X4 is perfect for 4-way front-stage/rear-fill or 3-way front-stage/subwoofer systems. Simply drop a pair of component speakers on the front channels and subs on the rear and BOOM – you got “The PUNCH.” With its flexible design, the P400X4 is an excellent amplifier choice for virtually any vehicle.
-
- Powered subwoofer enclosure
- PLC Wired remote control
- Wired remote mounting plate
- Two 10mm screws
- 196″ Wired remote cable (3.5mm stereo plugs on both ends)
- 12″ RCA to 4-pin Molex harness
- Power/ground terminal block
- Four 15A ATC fuses (2 pre-installed)
- 3mm Allen key
- 25.5″ Strip of hook-and-loop fastener
- Owner’s manual
-
With its super efficient Class-bd circuit topology, the P500X1bd will drop some serious BASS! Due to its dedicated low frequency response, this amplifier is optimized for mid-bass speakers or subwoofers only. No need to worry because its 1-ohm capability will drive a pair of 4-ohm DVC subwoofers or quad-configuration of 2-ohm DVC subwoofers with ease.
-
The P500X2 is an excellent way to PUNCH up your sound system without monopolizing your entire trunk – that way you have more room for subs! With its massive output stage, this amplifier is best suited for driving a pair of 8-ohm SVC subwoofers or four 2-ohm DVC subwoofers. Remember to utilize the recommended power and speaker cables to optimize power delivery.
Showing 1141–1152 of 1504 results